CGDPW - STATE TUF BUDDY, PART B

  • MSDS: CGDPW
  • Manufacturer: STATE CHEMICAL MFG CO
  • Product Name: STATE TUF BUDDY, PART B
  • National Stock Number: 8040-00N082792
Product Identification

Product ID:STATE TUF BUDDY, PART B
MSDS Date:05/01/1990
FSC:8040
NIIN:00N082792
Kit Part:Y
MSDS Number: CGDPW

Responsible Party
STATE CHEMICAL MFG CO
3100 HAMILTON AVE
CLEVELAND, OH 44114-3701
US

Emergency Phone: 908-458-5821

Info Phone: 908-458-5821

Cage: 53798

Contractor
STATE CHEMICAL MANUFACTURING CO.
CLEVELAND, OH 44114-3701 US

Telephone: 216-861-7114

Cage: 53798

Ingredients

PIPERAZINE, 1-(2-AMINOETHYL)-; (N-AMINOETHYLPIPERAZINE)

CAS: 140-31-8

RTECS: TK8050000

Fraction By Weight: <5%

OSHA PEL N/K

ACGIH TLV: N/K


DIETHYLENETRIAMINE; (ETHYLENE TRIAMINE) (INVALID MFR CAS #

CAS: 111-40-0

RTECS: IE1225000

Fraction By Weight: <5%

OSHA PEL 1 PPM (MFR)

ACGIH TLV: 1 PPM (MFR)

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: DIRECT CONTACT WITH EYES CAN
CAUSE IRRITATION. PROLONGED OR REPEATED WITH THE SKIN CAN CAUSE
SENSITIZATION OR OTHER ALLERGIC RESPONSES. CHRONIC: NONE KNOWN.
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:INGESTION: CONTACT MD OR POISON CONTROL CENTER IMMEDIATELY.
INHALATION: REMOVE TO FRESH AIR. SUPPORT BREATHING (GIVE OXYGEN OR
ARTIFICIAL RESPIRATION) . EYES: FLUSH IMMEDIATELY WITH PLENTY OF CO
OL WATER FOR AT LEAST 15 MINTUES. IF IRRITATION PERSISTS, CONTACT
MD. SKIN: WASH THOROUGHLY WITH PLENTY OF SOAP AND WATER. IF
IRRITATION PERSISTS, CONTACT MD.

Fire Fighting

Flash Point Method:SCC
Flash Point:>230F,>110C
Extinguishing Media:CARBON DIOXIDE, FOAM, DRY CHEMICAL OR WATER FOG.
Fire Fighting Procedures:WEAR NIOSH APPROVED SCBA AND FULL PROTECTIVE
EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE KNOWN.

Accidental Release

Spill Release Procedures:WHEN POSSIBLE, MIX A COMPONENT WITH B
COMPONENT AND ALLOW TO CURE TO AN INERT, HARMLESS SOLID; OTHERWISE
ABSORB SPILL WITH INERT ABSORBENT MATERIAL. SWEEP OR SCOOP UP. WASH
AREA WITH DETERGENT AND WAT ER. PREVENT WASHINGS FROM ENTERING
WATERWAYS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:AVOID DIRECT CONTACT WITH EYES OR
SKIN. DO NOT TAKE INTERNALLY. STORE CONTAINERS AT ROOM TEMPERATURE.
KEEP TIGHTLY CAPPED WHEN NOT IN USE.
Other Precautions:READ AND FOLLOW ALL LABEL DIRECTIONS AND PRECAUTIONS
BEFORE USING THE PRODUCT. THESE PRODUCTS ARE INTENDED FOR
INDUSTRIAL AND INSTITUTIONAL USE ONLY. NOT INTENDED FOR HOUSEHOLD
USE OR RESALE. KEEP OUT OF THE REACH OF CHILDREN.

Exposure Controls

Respiratory Protection:USE NIOSH APPROVED RESPIRATOR IF VENTILATION IS
INADEQUATE.
Ventilation:NORMAL LOCAL VENTILATION IS APPROPRIATE.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:ANSI APPROVED EMERGENCY EYEWASH AND DELUGE
SHOWER . RECOMENDED COVERALLS OR APRON TO MINIMIZE CONTACT.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.

Chemical Properties

Spec Gravity:0.04 (H*2O=1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:WHITE PASTE WITH AROMATIC AMINE ODOR
Percent Volatiles by Volume:<10 WT

Stability

Stability Indicator/Materials to Avoid:YES
STRONG ACIDS & EPOXY RESINS. DO NOT MIX EITHER PARTS OF THIS PRODUCT
WITH ANY OTHER CHEMICAL OTHER THAN THE OTHER PART.
Stability Condition to Avoid:NONE EXPECTED.
Hazardous Decomposition Products:BURNING MAY RESULT IN FORMATION OF
CARBON DIOXIDE, CARBON MONOXIDE, OR OXIDES OF NITROGEN.

Disposal

Waste Disposal Methods:DO NOT REUSE EMPTY CONTAINERS FOR ANY PURPOSE.
TIGHTLY CAP EMPTY CONTAINERS WITH ORIGINAL LIDS, WRAP AND PUT IN
TRASH. FOLLOW ALL FEDERAL, STATE AND LOCAL REGULATIONS REGARDING
WASTE DISPOSAL.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.